CSEN Enable

CSEN Digital Comparator Polarity Select

CSEN Conversion Mode Select

0 (SGL): Single Channel Mode: One conversion of a single channel (when MCE = 0) or set of bonded channels (when MCE = 1) per conversion trigger.

1 (SCAN): Scan Mode: Scans multiple selected channels once per conversion trigger.

2 (CONTSGL): Continuous Single Channel: Continuous conversion of a single channel (when MCE = 0) or set of bonded channels (when MCE = 1).

3 (CONTSCAN): Continuous Scan Mode: Continuously scans multiple selected channels.

SAR Conversion Resolution.

0 (CLK10): Conversions last 10 internal CSEN clocks and are 10-bits in length.

1 (CLK12): Conversions last 12 internal CSEN clocks and are 12-bits in length.

2 (CLK14): Conversions last 14 internal CSEN clocks and are 14-bits in length.

3 (CLK16): Conversions last 16 internal CSEN clocks and are 16-bits in length.

CSEN Accumulator Mode Select

0 (ACC1): Accumulate 1 sample.

1 (ACC2): Accumulate 2 sample.

2 (ACC4): Accumulate 4 sample.

3 (ACC8): Accumulate 8 sample.

4 (ACC16): Accumulate 16 sample.

5 (ACC32): Accumulate 32 sample.

6 (ACC64): Accumulate 64 sample.

CSEN Multiple Channel Enable

Start Trigger Select

0 (PRS): PRS Triggering. Conversions are triggered by the PRS channel selected in PRSSEL.

1 (TIMER): Timer Triggering. Conversions are triggered by a local CSEN timer reload.

2 (START): Software Triggering. Conversions are triggered by writing a 1 to the START field of the CMD register.

CSEN Digital Comparator Enable

CSEN Disable Right-Shift

CSEN DMA Enable Bit

CSEN Converter Select

CSEN Chop Enable

CSEN Automatic Ground Enable

CSEN Mux Disconnect

Greater and Less Than Comparison Using the Exponential Moving Average (EMA) is Enabled

Select Warmup Mode for CSEN

Local Sensing Enable

Charge Pump Accuracy